Keeping It Safe, Certified, and Constructable: Inspection Services for Mining Operations in Regional NSW
At Trang Imagineering, we know that engineering drawings are only half the story — the other half is what gets built on-site. And in the mining sector, that means ensuring structural integrity, guarding compliance, and workmanship are up to scratch before boots hit the ground and machines fire up.
Our Inspection Services are designed to bridge the gap between design intent and real-world construction. Whether you're running a remote copper mine near Cobar or a gold plant out west of Parkes, we provide on-site verification, compliance auditing, and practical engineering inspections tailored to operational mining environments.
Structural Inspections That Withstand the Load
Mining infrastructure is under constant stress — from vibration, weather exposure, load cycling, and operator use. We conduct statutory structural inspections on critical plant infrastructure, including:
Elevated platforms and access gantries
Conveyor support structures
Pipe racks and equipment skids
Tank supports and foundations
Corrosion
Our inspections cover AS4100 and AS3990 compliance, fatigue concerns, visible wear and deformation, as well as recommendations for remediation or lifecycle upgrades.
Guarding Audits for Operator Safety
Nothing shuts down a mine quicker than a guarding breach — and the fines aren’t small either. Trang conducts guarding audits across fixed plant, processing areas, and mobile machinery to ensure compliance with:
AS4024.1 Series – Safeguarding of Machinery
NSW Mining Regulations
Site-specific HSE requirements
We identify pinch points, fall risks, reach zones, and non-compliant retrofits — and then provide practical design solutions for compliant guarding that can be fabricated locally and installed with minimal downtime.
Fabrication & Installation Inspections
Even the best design will fail if it's poorly built. Trang Imagineering offers fabrication and installation inspections that check:
Welds and structural joins
Assembly tolerances
Bolt torques and fastener selection
Installation accuracy vs. shop drawings
Fit-up of guarding, stairs, handrails, and more
We work directly with site supervisors, fabricators, and OEM installers to ensure structures are built right, first time, and align with the intent of engineering documentation and relevant codes.
Regional Presence, Practical Outcomes
Unlike city-based firms, Trang operates regularly across regional NSW mining sites — from Broken Hill to Boggabri, Cobar to Cadia. We understand:
Remote access challenges
Limited craneage or rework capability
Tight shutdown windows
Contractor variability
Our inspection reports are clear, photographic, and actionable — written for both the engineer and the site supervisor. No fluff, no 30-page waffle — just real insights that improve safety and build quality.
When Do You Need a Trang Inspection?
Before plant commissioning
During shutdowns and refurbishments
When importing fabricated steelwork
Following a workplace incident or near miss
To support compliance documentation for regulatory bodies
Why Trang?
Experienced Mechanical Engineers with structural verification expertise
Familiar with AS4100, AS1657, AS3990, AS4024, and mining compliance obligations
Regional focus — we go where the work is
Fast turnarounds and real-world understanding of fabrication and construction
Need a second set of eyes on your next install?
Get in touch with Trang Imagineering to book an inspection, or to integrate our audit services into your next shutdown or fabrication order.